Cardiac Catheter Cupboards
1. The cupboard size is generally 2250mm x 900mm wide x 500mm deep, unless shown or requested
2.
The carcase or outer construction of the cupboard can be
either:-
In
melamine faced MDF (usually white but available in four other
colours) with a 2mm thick edging to the exposed edges.
Or
In laminate faced MDF with
a 2mm thick edging. A choice of eight plain and two woodgrain colours
is available.
3. The roller shutter door is manufactured from uPVC in a choice of eight plain and two woodgrain colours. The track is available in three plain colours
4. The table below shows the full range of eight standard catheter cupboards. A more detailed drawing is available for each type, by clicking on the appropiate diagram.
5. In conditions of high humidity, carcases & internal divisions can be manufactured from solid grade laminate. Prices available on request
Click on the diagrams to view an enlarged more detailed view.
NAME |
Cupboard
Type A |
Cupboard
Type B |
Cupboard
Type C |
Cupboard
Type D |
DIAGRAM |
 |
 |
 |
 |
DESCRIPTION |
The Catheters are stored on hanging hooks on either side of the sliding, vertical divisions, which can be fixed at any given height to suit varying types of catheter. (Drawing SDG 311) |
Pull out sliding hangers are fixed to the underside of the top shelf of the cupboard and each hanger holds up to six hooks which can all be accessed when the hanger is pulled out of the cupboard. (Drawing SDG 312) |
Drawers, which can contain vertical divisions to form compartments, with a shelf above, and adjustable or fixed vertical divisions on further shelves. (Drawing SDG 313) |
Two
sets of pull out sliding hangers, fixed to the underside of shelves,
each hold six hooks, which can all be accessed when the hanger is
pulled out of the cupboard. The upper shelf has fixed or adjustable
vertical divisions, suitable for the storage of boxed or coiled
products, or paperwork. (Drawing SDG 314) |
NAME |
Cupboard
Type E |
Cupboard
Type F |
Cupboard
Type G |
Cupboard
Type H |
DIAGRAM |
 |
 |
 |
 |
DESCRIPTION |
Deep, narrow vertical apertures to store long boxes of catheters. The upper shelf can have fixed or adjustable vertical divisions as before. (Drawing SDG 315) |
Two sets of horizontal spikes, one set projecting from the back of the cupboard and the other on a set - in division, to allow the catheters to be hung vertically from the small hole in one end of the packaging of the catheter. The upper shelf can have fixed or vertical divisions (Drawing SDG 316) |
Pull out and removable plastic trays are fitted below adjustable shelves. (Drawing SDG 317) |
A combination of cupboard types A and E. (Drawing SDG 318) |
